SUZUKI 11210-49002 Pistons Rings Cylinder Block 70MM

( Manufacturer Part Number: 11210-49002 ), ( Part Type: Ring Piston Cylinder Block )

Review SUZUKI Pistons Rings Cylinder Block Stock 70mm Bore fits GS1000S GS1000E 1980

The GS1000S Piston Rings 1980 GS1000E Cylinder Block, Suzuki Part Number 11210-49002, is a high-quality replacement component designed specifically for Suzuki's iconic GS1000E model from the year 1980. These piston rings are an essential part of your engine's operational system, responsible for sealing the combustion chamber to prevent combustion gases from escaping into the crankcase.

These piston rings are manufactured to exacting specifications, ensuring a perfect fit for your GS1000E's cylinder block with a bore diameter of 70mm. They are made from high-temperature resistant materials, such as chrome steel or nickel-chromium-molybdenum alloys, to withstand the intense heat and pressure produced during engine operation. The rings are also precision-engineered to provide a tight seal, minimizing oil consumption and preventing engine blowby.

The GS1000S Piston Rings 11210-49002 set includes both the top and bottom rings, ensuring a complete and professional repair or replacement. The top ring, also known as the compression ring, seals the combustion chamber and ensures proper combustion. The bottom ring, or oil control ring, helps prevent oil from entering the combustion chamber while ensuring proper lubrication of the piston.

Installing these piston rings is a straightforward process for experienced mechanics, but it's always recommended to follow the manufacturer's instructions closely to ensure proper fit and performance. Proper installation is crucial for maintaining your engine's efficiency and longevity.

In summary, the GS1000S Piston Rings 1980 GS1000E Cylinder Block, Suzuki Part Number 11210-49002, is a high-quality, precision-engineered component designed to ensure optimal engine performance and longevity. Investing in these piston rings is an investment in your GS1000E's performance, reliability, and longevity.

1. OEM (original equipment manufacturer) part: The piston rings are manufactured by Suzuki, ensuring they are designed to fit perfectly in your GS1000E engine and provide optimal performance.

2. High-quality materials: These piston rings are made from top-notch materials that are resistant to wear and tear, ensuring they last a long time.

3. Improved engine performance: New piston rings can help improve engine performance by minimizing oil consumption, reducing engine noise, and preventing oil leaks.

4. Easy installation: Replacing piston rings is a straightforward process that can be done by most DIY enthusiasts, saving you money on labor costs.

1. Cost: Piston rings are not the cheapest replacement parts, and you may need to purchase other related parts, such as new pistons, to complete the repair.

2. Availability: Depending on your location, you may have to wait for the parts to be shipped, which could delay your repair.

3. DIY complexity: While replacing piston rings is a straightforward process, it can be challenging if you are not familiar with engine disassembly and reassembly.

If you are looking to improve the performance of your 1980 GS1000E engine, replacing the piston rings is a worthwhile investment. The OEM quality and durability of these piston rings make them an excellent choice. However, it's essential to consider the cost and potential complexity of the installation process. If you are confident in your DIY skills, the savings from installing the parts yourself could outweigh the cost. If not, consider having a professional mechanic install the rings to ensure the job is done correctly.

I recommend purchasing the GS1000S piston rings (1980 GS1000E, cylinder block, Suzuki, 70mm, part number 11210-49002) from a reputable dealer to ensure you are getting authentic, high-quality parts. If you are unsure of the installation process, consider hiring a professional mechanic to ensure the job is done correctly.

Details:

I take pride in not selling junk.

There are a few spots on a few of the pistons that are dinged but they dont affect the ability to pass through the cylinder in any way, however there is one small flattened spot on the lip above the rings on one piston I photographed this.

The pistons slide up and down the cylinders with the rings off just fine, however the last person to install one of the wrist pins somehow get a little bit of one of the c clips wedged in between it and the piston so it had kind of melted and fused to both surfaces at contact making the piston removal process kind of difficult, but I gently trammeled off the excess goo metal from each surface until the pin slid into the piston and had the same feel as the other ones did.

These cylinders have that liquid smooth thing about them, I can honestly say I've never seen such a smooth looking bore on cylinders before, I can see why these bikes are such a special type of bike after having the opportunity to disassemble one. May fit other years model's.

Are part of the , please review them carefully.

These this item fit the listed vehicle either, to the best of my knowledge research on , etc.

part #: 1121049002 prices

• $49.98-$59.88

specifications cylindermotorcycleiz:

• for models: Gs1000s, Gs1000e
• for makes: Suzuki
• for years: 1980
• mpn: 11210-49002
• part type: Ring Piston Cylinder Block

General:

• in stock: Yes
• condition: Used
• Motors > Parts & Accessories > Motorcycle Parts > Engines & Engine Parts > Cylinder Heads & Valve Covers

Ratings:

1. I'm so grateful. Highly valued. Great communications 01-09-15
2. Good buyer, prompt payment, valued customer, highly recommended. 01-11-15
3. I thank you for your purchase and look forward to doing business with you again. 01-03-15
4. Great transaction, pleasure doing business! 01-09-15
5. Hope to deal with you again. Thank you. 01-03-15

Shipping:

• type: Flat
• cost: $0.0
• handling: 20 days

Returns:

• paid by: Buyer
• time: 14 Days
• policy: returns accepted
• type: Money Back

Seller:

• zipcode: 97053
• city: Warren, Oregon

Offer:

• # bids: 0
• quantity: 1
• best offer: true
• Started: January 15, 2015, 1:32 pm
• # Sold: 0

Payments:

• PayPal

Suzuki 11210-49002 Is Similar To:

• 01421-10458 Suzuki Cylinder Stud Buy (41.7% similar) Fit GT380 GT550 RM250 RM400 motorcycle model's. Bin p3 note: this is a pack of 3 studs. New genuine suzuki cylinder stud buy...(October 3rd, 2017)
• 06-07-08-suzuki-11101-39a50-valve-top-end-2001 Engine Suzuki Cylinder Head Front Cam Rocker Intruder Boulevard (34% similar) Thanks and ride safe. The part number shows it will fit these model's. VS800G intruder VS800 S50 boulevard the condition is good in head assembly ready for use. The listing will include cam and rockers cylinder head front rocker VS800G S50 intruder boulevard 05 this is a that was pulled off 2005 ...(April 7th, 2018)
• 07-08-suzuki-11103-39a50-valve-top-end-2001-2002 Engine Motor Suzuki Cylinder Head Rear Cam Rocker Intruder Boulevard (33.8% similar) The part number shows it will fit these model's. VS800G intruder VS800 S50 boulevard the condition is good in head assembly ready for use. The listing will include cam and rockers. Thanks and ride safe...(April 7th, 2018)
• 083b27a-0004 Suzuki Sv Front Cylinder Head Valvetrain Valve Cover (36.2% similar) Office use: Lr-RP 2003 SUZUKISV1000-03372...(February 12th, 2019)
• 083b27a-0006 Suzuki Sv Rear Cylinder Head Valvetrain Valve Cover (37.8% similar) ...(February 12th, 2019)
• 09100-08011 Suzuki Cylinder Head Bolt Nos (44.8% similar) Suzuki T10 cylinder head bolt nos. Absolutely no disappointments...(February 18th, 2019)
• 09106-07021 Suzuki 2007 Rmz450 Cylinder (45.5% similar) The rates listed may be higher or lower than actual cost...(November 23rd, 2017)
• 09108-06026 Suzuki Cylinder Stud Bolt Nos (46.4% similar) Absolutely no disappointments. Suzuki TM75 TS75 TS50 AS50 AC50 cylinder stud bolt nos...(May 30th, 2018)
• Nos Stud Suzuki Cylinder 09108-08061 Gs550 Gs650 (36.4% similar) ...(January 1st, 2015)
• Head Suzuki 09108-10112 Cylinder Gs1000 Studs 09108-10028 1980 (32.9% similar) 1980 suzuki GS1000 cylinder head studs model manufacturer part number 1980 suzuki GS1000GLT condition scratches, marks. You get everything pictured. See shipping detail for all shipping options. Appears to be straight. A trusted member for 14 years. Threads appear to be OK. Comes with hardware...(February 12th, 2015)
• 09108-10097 Suzuki Engine Motor Cylinder Head Studs Stud Bolt Bolts Screws (39.2% similar) Roberts cycle 78 suzuki SP370 engine motor cylinder head studs stud bolt bolts screws screw this set is in usable condition but has some minor damage...(March 31st, 2019)